Recommended Maintenance Schedule(S) - Encore Rage ER52FX730V Operator's Manual

RECOMMENDED MAINTENANCE SCHEDULE(S)

Maintenance Service Interval
Before each use or daily
After the first 8 hours
After the first 100 hours
After the first 250 hours
Every 40 hours
Every 100 hours
Every 200 hours
Every 250 hours
Every 500 hours
Monthly
Yearly
Maintenance Procedure

Check the engine oil level

Check the mower blades

Check the safety interlock system

Check for loose hardware

Check for belt obstructions

Check for fuel and oil leakage

Clean the engine and exhaust system area

Clean the grass and debris build-up from the machine and
cutting deck, including under the deck

Change the engine oil

Check the wheel hub torque

Torque the wheel lug nuts

Clean dust and dirt from cylinder and cylinder head fins

Change engine oil

Clean and regap spark plugs

Change the hydraulic filter and replace the fluid in the
reservoir

Check the hydraulic oil level

Check the condition of the belts

Check the tire pressures

Lubricate the caster wheel bearings

Change the engine oil.

Grease the lift linkage pivots

Change engine oil filter

Replace the primary air cleaner

Check secondary air cleaner – replace if dirty. See the
Engine manual for additional information

Change the hydraulic filter and fluid (Synthetic 15W50)

Check the wheel hub torque

Torque the wheel lug nuts

Replace the secondary air cleaner. See the engine manual
for additional information.

Check the battery charge

Grease the front caster pivots
22