Connecting The 3G Modem To Your Securityprobe - AKCP HSUPA 3G Modem Setup Manual

HSUPA 3G Modem Setup Manual

Connecting the 3G modem to your securityProbe

Step 1: Connect the 3G modem to the securityProbe unit's USB port, as shown in the picture
above (it also works with a USB extender cable). It will be automatically detected by the
securityProbe.
Step 2: Configure the notification settings in the securityProbe's web interface. See below for the
basic instructions.
Updated until firmware 404z & AKCess Pro Server 11.1.0 - 6 -