AKCP HSUPA 3G Modem Setup Manual page 11

HSUPA 3G Modem Setup Manual
On the next screen you can setup the Maximum Times to Resend which is 5.
You can also set the Resend Intervals and the Resend on Server Timeout in case there was a
problem connecting to the GSM service.
Clicking on the "Finish" button will save your new SMS action, and complete the wizard.
You will now see the new SMS action in the action list as shown above.
You can test it to make sure it is working correctly by first highlighting the action, then clicking on
the "Test Action" button.
You can then navigate to the Summary page and check the Syslog for the entry regarding the
successful test message.
Now that you have your SMS action completed, you can link this action to any sensor connected
to your base unit using the "Link Sensor to Action Wizard".
Updated until firmware 404z & AKCess Pro Server 11.1.0 - 11 -