Connecting The 3G Modem To Your Pc/Server - AKCP HSUPA 3G Modem Setup Manual

HSUPA 3G Modem Setup Manual

Connecting the 3G modem to your PC/Server

Step 1: Connect the 3G modem to the PC/Server's free USB port, as shown in the picture above
(it also works with a USB extender cable). It will be automatically detected by Windows, and show
the setup program for the driver installation. See below for a guide on installing the drivers.
Step 2: Configure the notification settings in the AKCess Pro Server. See below for the basic
instructions.
Updated until firmware 404z & AKCess Pro Server 11.1.0 - 18 -