KitchenAid Pro Line KPCG100 Owner's Manual page 27

CARE
3. Carefully slide the faceplate
assembly away from the motor
housing. A separate burr-shaft
assembly on the inside of the motor
housing will usually slide out with
the face plate assembly. Place a
hand under the burr-shaft assembly
to prevent it from falling as the
faceplate assembly is removed. If
the burr-shaft assembly does not
slide out with the face-plate
assembly, grasp the center shaft of
the burr-shaft assembly and remove
it from the housing.
Burr-Shaft Assembly
Faceplate Assembly
4. Using the burr-cleaning brush, clean
the burr mounted on the burr-shaft
assembly and the burr mounted
within the motor housing.
26
CLEANING
AND
NOTE: Never wash the burrs or burr-
shaft assembly in water. Keep them dry
at all times.