Maxplus Industries HTS 9300 User Manual page 8

6.1 Getting Started
2) Antenna Setup
Press the MENU button to display the main menu.
Use the / and / to move in menu.
CH VOL VOL
CH
Press the on the "Dish Setting". The following window will appear. <Figure 6-2>
If you have motorized dish, press the
Note : Enter 4-Digit password if need arise.
The default password is '0000'.
<Figure 6-2>
Select item you want to edit and change each parameter.<Dish Setting>
- LNB Power : Select LNB power( ON / OFF / 13V / 18V)
- LNB Type : Select your LNB Type.(Single / Universal / OCS)
- LNB Freq : Select LNB oscillator frequency.
- 22KHz : Set the path of 0/22KHz switch box.
- DiSEqC switch : Select DiSEqC box type(OFF / 1,0 / 1.1)
- Committed / Uncommitted : Select DiSEqC port.
Select item you want to edit and change each parameter.<Motorized Setting>
- DiSEqC Motor : Select DiSEqC Motor type (OFF / 1,2 / USALS)
- Move : You can change the dish position to West / East.
- Limit : If you want to set limit, press
- Disable Limit : You can disable East and West Limit.
- Goto Center : Move the dish to the 0 position.
- Set East / West Limit : You can move the dish East or West using
Press the
on the "Motorized Setting". <Figure 6-3>
<Figure 6-3>
.
/ .
VOL VOL
to fix East or West limit.
12
6.1 Getting Started
- Sat Degree : Satellite location.
- Antenna Position : Press .
- Goto Reference : Move the dish to the 0 position.
- Antenna Longitude : Your longitude at present.
- Antenna Latitude : Your latitude at present.
Note : When you change each parameter,you need to know exact parameter of
LNB to modify L.O.(local oscillator) frequency.
Note : When you change each parameter,you need to understand environment
of connecting the receiver and antenna in order for you to set 22KHz and
DiSEqC properly.
After setting, press the EXIT button to store the changed data.
3) Satellite Scan
Through this function, the receiver searches for all the available channels and saves them
in the memory.
Auto Scan <Figure 6-4>
Press the on which you want to scan in satellite list. You can select more than one
satellite.
Press the and select "Search type" or "network Search" option.
VOL
- Search Type : Determine searching channels(All channel / Free channel only / TV
channel only)
- Network Search : If you set to ON, you can find more transponders through NIT Scan.
If you press the on the "SCAN", the selected satellites will be scanned.
<Figure 6-5>
13