Maxplus Industries HTS 9300 User Manual page 10

6.1 Getting Started
In the right side of screen, detailed information of the selected channel will be
displayed.
(Satellite Name, Frequency(polar) and Channel Name)
You can navigate between channels with this buttons.
- / : Moves up / down.
CH
CH
- or / or : Moves page up / page down.
VOL VOL
- RED : Shows all channels in current group.
- GREEN : Shows channels sorted by alphabet.
- YELLOW : Shows channels sorted by Transponder.
- BLUE : Shows channels sorted by CAS system.
When the scroll bar is positioned on the channel you want to see, press
5) Other Function on Remote Control
Volume Control
While you are watching a program, press
When necessary, press MUTE button to remove the sound of the program.
Then, your receiver goes into mute condition and the mute icon will be displayed.
Press MUTE button again to turn the sound on.
Channel Information
Whenever press the INFO button, the information banner will appear for a few
seconds.
If you press the INFO again on the information mode, the detail banner will appear.
TV / SAT switching
If you press TV/SAT, the signal reception path will be changed to RF modulator.
- TV Mode : TV ANT In signal will be out. ( front will display "TV" )
- SAT Mode : Decoded signal will be out through RF. ( front will display channel number )
.
or to control volume.
VOL VOL
16
6.1 Getting Started
TV / RADIO switching
You can use this menu when you change a TV channel to a Radio channel or vice
versa.
RECALL(RED)
Return to the previous channel.
Subtitle / Audio
You can adjust the subtitle and audio status of the current channel.
Press AUDIO ( GREEN ) button, then subtitle and audio related menu will be displayed.
- Audio Mode : Stereo -> Mono-Left -> Mono-Right
- Audio Track : All tracks available in this program.
- Subtitle : All subtitle language available in this program.
Note : These subtitle and audio parameters are workable only when the
receiving channel supports these functions.
Teletext(YELLOW)
Teletext Service is text data service from Service Provider.
It is available only when the satellite signal carries teletext service data.
PAUSE
This key is used to pause the video. Press once more to resume the video. In pause
mode you can zoom in partial of video.
In pause mode, select position using
Press to zoom in. Press again to zoom out.
GROUP
When watching TV or listening to Radio, you can get the satellite or favorite channel
group list by pressing the GROUP button on the remote control unit.
Group menu will display only registered satellite and favorite group.
/ / / .
CH VOL VOL
CH
17