System Setting - Maxplus Industries HTS 9300 User Manual

6.2 System Setting

1) Time Setting
This sub menu allows you to set your local time, wake up time, wake up channel and sleep
time. <Figure 6-9>
- GMT Usage : If you set ON, local time is determined by adjusting the differences from
GMT(Greenwich Meantime), according to your location.
- Current Date : If GMT Usage ON, this date is determined by GMT.
If GMT Usage OFF, you can modify this by pressing
If you set OFF, receiver doesn't refer to GMT. Local time is determined by
adjusting current date and current time.
- Current Time : If GMT Usage ON, this time is determined by GMT.
If GMT Usage OFF, you can modify this by pressing NUMERIC button.
- Local Offset : If GMT Usage ON, Local time is GMT time + Local Offset.
- Wake Up Mode : You can set the cycle of the wake up mode.(Off / Once / Daily)
- Wake Up Time : You can set wake up time by pressing NUMERIC button.
- Wake Up Channel : You can set wake up channel by pressing
- Sleep Mode : You can set the cycle of the sleep mode(Off / Once / Daily)
- Sleep Time : You can set sleep time by pressing NUMERIC button.
<Figure 6-9>
.
.
18
6.2 System Setting
2) A/V Output Setting
This sub menu allows you to set audio/video output setting. <Figure 6-10>
- Audio Language : Default language of audio when changing channel.
- Subtitle Language : Default language of subtitle.
- Video Format : Video output format ( AUTO / PAL / NTSC ) .
- Screen Format : TV aspect ratio ( 16:9 / 4:3 Letter-Box / 4:3 Pan Scan )
- RF Type : If you set PAL in Video Format, this receiver supports PAL B/G, PAL I, PAL D/K
among PAL Standards.
- RF Channel : Sets the channel to display the audio and video signal on your TV. ( 21 ~ 69 )
If you select 40, receiver will be displayed at channel 40 on your TV.
<Figure 6-10>
3) OSD Setting
This sub menu allows you to set menu language, OSD transparency, Information and
volume timeout. <Figure 6-11>
- Menu Language : Select the desired language of the menu.
- Transparency : Select OSD transparency of the menu. ( 1% ~ 100% )
- Information Timeout : Select the display duration of the information banner.
( 1 sec / 2 sec / 3 sec / 5 sec / 10 sec )
- Volume Timeout : Select the display duration of the volume box.
( 1 sec / 2 sec / 3 sec / 5 sec / 10 sec )
19