Table of Contents
Advertisement
6.5 Games
<Figure 6-27>
6.6 System Information
You can check the current information about your receiver such as receiver model name,
S/W version, H/W version, manufacturing date, etc. <Figure 6.29>
Note : This information is necessary when you download new software or you
need to repair the receiver.
<Figure 6-29>
<Figure 6-28>
30
Trouble Shooting
There may be various reasons for the abnormal operation of the unit.Therefore,if the unit
does not work properly,check it according to the procedures shown in the table below :
Problem
Possible causes
LED on front panel
AC power cord
does not light.
disconnected.
No Picture or sound.
Wrong connection of the
video/audio output to TV
input terminal.
Wrong connection of
satellite antenna cable.
Wrong direction of satellite
antenna.
No signal or weak signal.
Wrong setting of channel
information in MENU screen.
Black-and-white
Your TV mode is different
screen or V-Hold.
from satellite broadcasting
mode.
The remote
Battery exhausted.
controller is not
Fluorescent light interfering
working.
with the remote controller.
Remote controller is
incorrectly aimed.
Remedy
Connect power cord properly
into the power socket.
Connect two terminals correctly
with RCA or RF cable.
Connect the antenna cable
correctly.
Adjust the direction of antenna.
Check the cable connections,
LNB and other equipment
connected between the LNB
and the receiver or adjust the
antenna.
Type the setting value correctly.
Use TV of same mode.
Use the NTSC/PAL converter
connected to the receiver and
TV.
Change the batteries.
Switch off the light.
Aim the remote control at the
receiver.
31
Advertisement
Table of Contents
