Controls/Functions; Front Panel; Rear Panel - Maxplus Industries HTS 9300 User Manual

Controls/Functions

4.1 Front Panel

3
1 2 4 5
Standby/Power on lndication Light : Flashing red on "Stand By" mode and no
1
right on "Power On" mode.
Indication Light : While pressing RCU key, this light will be flashing at the same
2
time.
Power : To switch the receiver in "standby" mode or in power on mode.
3
- CH. : To change channel or cursor position on the application screen.
4 5 /
Smart Card Reader(option) : To insert smart card for encrypted channel access.
6
6
6

4.2 Rear Panel

1
RF OUT
UHF 21-69
TV ANT IN AUDIO VIDEO RS-232C
2 3 4 5 6
No. Name Connector
1 RF OUT UHF 21-69 IEC 169-2 male
2 TV ANT IN IEC 169-2 female
3 AUDIO R RCA cinch
4 AUDIO L RCA cinch
5 VIDEO RCA cinch
6 RS-232C DB-9
7 LNB INPUT IEC 169-24 female
8 LOOP OUT IEC 169-24 female
7
LNB INPUT
950-2150MHz
400mA max.
AC 90-250V
47-63Hz, 30W
LOOP OUT
8
Function
Output to TV.
Input from terrestrial antenna.
Right audio output.
Left audio output.
Composite video output.
Low speed serial port.
IF input from LNB to digital tuner.
IF loop-through output from digital tuner.
7