Reloop DIGITAL JOCKEY 2 Instruction Manual page 15

2. Peripheral Connections [Only Interface Edition]
Your Digital Jockey 2 Interface Edition features an integrated professional audio interface. There-
fore an additional external or integrated PC sound card is not necessary. Below you can find a list
of all possible connections.
a) Output Connection (rear panel) -B45-
Here you can plug in your main stereo system, for example an amplifier or active speakers.
b) Input Connection (rear panel) -B46-
You can connect a playback device to this input, like a turntable or a CD player, for example, in
order to integrate external players in your setup.
NOTE!
Next to the input there is a Phono/Line switch -B47- that has to be adjusted according to the
connected source.
c) Microphone input (front panel) -B35-
Here you can plug in a regular dynamic microphone. Via the microphone equalizer -B36- it is
possible to adjust the microphone's sound characteristics.
d) Headphones input (front panel) -B38-
Connect your headphones to this jack. Via the headphones equalizer -B39- it is posible to adjust
the headphones' sound characteristics.
NOTE!
As the Reloop Digital Jockey 2 Interface Edition is not a stand-alone device the inputs and
outputs are only functional in combination with computer and software.
PHONO / LINE AMP / SPEAKERS
MIC HEADPHONES
3. ASIO Driver Installation [Only Interface Edition]
Put the provided installation CD in your CD ROM drive. An instsallation menu will start automa-
tically.
NOTE!
If your CD ROM auto start function has been disabled you can manually open the autorun.exe
file on your CD.
Click on the „Install ASIO Driver" button in order to carry out the setup. Please follow the messa-
ges displayed on screen in order to carry out the ASIO driver installation. As last step you should
reboot your computer in order to complete the ASIO driver installation.
15