Safety Instructions - Reloop DIGITAL JOCKEY 2 Instruction Manual

OPERATION MANUAL
Congratulations on purchasing the Digital Jockey 2. Thank
you for placing your trust in our disc jockey technology. Before operating
this equipment we ask you to carefully study and observe all instructions.
Please remove the Digital Jockey 2 from its packaging. Before initial
operation please make sure that the device has not been visibly damaged during
transport. If you detect any damage to the power cable or the casing, do not
operate the device and contact your specialised dealer.
In order to protect the Digital Jockey 2 the device has been supplied with a protective foil. Please
remove this foil before initial operation.

SAFETY INSTRUCTIONS

CAUTION!
Please exercise particular caution when handling 240 V power voltage. This
voltage rating may lead to a critical electrical shock! Any damage caused by
the non-observance of this operation manual excludes any warranty claims.
The manufacturer is not liable for any damage to property or for personal
injury caused by improper handling or non-observance of the safety
instructions.
• This device has left the factory in perfect condition. To maintain this condition and to ensure
a risk-free operation the user must observe the safety instructions and warnings contained in
this operation manual.
• For reasons of safety and certification (CE) the unauthorised conversion and/or modification of
the device is prohibited. Please note that in the event of damage caused by the manual modifi-
cation to this device any warrantyclaims are excluded.
• The inside of the device does not contain any parts which require maintenance, with the excep-
tion of wear parts that can be exchanged from the outside. Only qualified staff must carry out
maintenance, otherwise warranty does not apply!
• The Fuse must exclusively be exchanged against fuses of the same class, with the same trigger
features and nominal current rating.
• Make sure that the power will only be supplied after the device has been fully set up. Always
plug in the mains plug last. Ensure that the mains switch is in the "OFF" position when connec-
ting the device to power.
• Only use cables that comply with regulations. Observe that all jacks and bushes are tightened
and correctly hooked up. Refer to your dealer if you have any questions.
• Ensure that when setting up the product the mains cable is not squashed or damaged by sharp
edges.
• Prevent the mains cable from coming into contact with other cables! Exercise great care when
handling mains cables and connections. Never touch these parts with wet hands!
• Connect the power cable exclusively to appropriate shock-proof outlets. The only supply point
to be used is a supply outlet in accordance with specifications of the public supply network.
• Disconnect the device from the supply outlet when not in use and before cleaning! Be sure to
hold the mains plug by the body. Never pull the mains cord!
• Position the device on a horizontal and stable low-flame base.
• Avoid any concussions or violent impact when installing or operating the device.
• When selecting the location of installation make sure that the device is not exposed to exces-
sive heat, humidity, and dust. Be sure that no cables lie around openly. You will endanger your
own safety and that of others!
• Do not rest any containers filled with liquid that could easily spill onto the device or in its imme-
diate vicinity. If, however, fluids should access the inside of the device, immediately disconnect
the mains plug. Have the device
• checked by a qualified service technician before re-use. Damage caused by fluids inside the
device is excluded from the warranty.
• Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below
5° C) conditions. Keep the device away from direct exposure to the sun and heat sources such
as radiators, ovens, etc. (even
• during transport in a closed vehicle). Never cover the cooling fan or vents. Always ensure suf-
ficient ventilation.
• The device must not be operated after being taken from a cold environment into a warm en-
vironment. The condensation caused hereby may destroy your device. Do not switch on or
operate the device until it has reached
• ambient temperature!
• Controls and switches should never be treated with spray-on cleaning agents and lubricants.
This device should only be cleaned with a damp cloth. Never use solvents or cleaning fluids with
a petroleum base for cleaning.
• When relocating, the device should be transported in its original packaging.
• When starting operation, the faders and volume controls of your amplifier must be set to mi-
nimum level. Bring the loudspeaker switches into the "OFF" position. Wait between 8 to 10
seconds before increasing the volume to avoid shot noise created by transient effect, which
could cause damage to loudspeakers and the diplexer.
• Devices supplied by voltage should not be left in the hands of children. Please exercise particu-
lar care when in the presence of children.
• At commercial facilities the regulations for the prevention of accidents as stipulated by the
organization of professional associations must be observed.
• At schools, training facilities, hobby and self-help workshops the operation of the device must
be monitored with responsibility by trained staff.
11