Mounting To A Roof Rack - KVH Industries TracVision A5 Shop Manual

Mounting to a Roof Rack

• Position the roof rack crossbars 35
center.
• At least 1" clearance is required between the underside of the
antenna and the roof. To raise the antenna higher, use the spacers
supplied in the kitpack (see page 2.7 of the Installation Guide for
details).
• Always use the TORX hardware supplied in the kitpack. Do not
use any substitutes.
Effective April 2005
Subject to change without notice
54-0239
1
/ " apart, measured center-to-
2
TracVision A5 Shop Manual © 2005 KVH Industries, Inc., All rights reserved.