Backup - Samsung SDH-P4041 User Manual

main menu
Alarm Schedule
You can set the conditions and operating hours for scheduled alarms.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Event> window to
move to <Alarm Schedule>, and press [ENTER] button.
2. Use direction buttons ( ◄►) to move to a desired item,
and set the value.
Alarm : Sets the alarm output method.
ON : Marked in orange, and always generates alarm on
scheduled time.
OFF : Marked in white, no alarm is generated even if an
event occurs.
Event Sync : Marked in Blue, generates alarm only when an
event occurs.

M
When the alarm is generated on the scheduled time, you can stop the alarm by canceling the schedule.
3. When the Alarm Schedule setup is done, press <OK>.

BACKUP

You can check the backup device and set the backup schedule by channel or by time.
The product only supports external HDD of USB memory and USB/SATA type. (Page 109)
Setting the Backup
You can backup the desired data to a connected device.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control.
2. Use the left/right button (◄ ►) to select <Backup>.
Backup menu is selected.
56_ main menu
Alarm Schedule
BEEP
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
All
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Hol
OFF ON Event Sync
OK Cancel
Logout
Backup
Backup
Return