Samsung SDH-P4041 User Manual page 65

main menu
Setting the PTZ
To use Camera's PTZ functions, ID and protocols of each camera and DVR should be matched.
For other settings, refer to the <Remote Device> settings. (Page 47)
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Device> window to
move to <Camera>, and press [ENTER] button.
2. Select <PTZ>.
A window of PTZ settings appears.
3. Use direction buttons ( ◄ ►) to move to a desired item,
and select it.
ID : Set the ID of the connected camera of each channel.
You can easily setup by using the numeric buttons on the
remote control.
Protocol : Set the protocol of the connected camera of each
channel.

M
You can check the camera's ID and protocol if you turn the camera off and on after connecting it to the DVR.
4. When the PTZ setup is done, press <OK>.
44_ main menu
Camera
PTZ
Camera
CH ID Protocol
>
1 0 None
>
2 1 None
>
3 2 None
>
4 3 None
>
5 4 None
>
6 5 None
>
7 6 None
>
8 7 None
Previous/Next Page
OK Cancel