Video Loss Detection - Samsung SDH-P4041 User Manual

All-in-one security system
Table of Contents

Advertisement

Video Loss Detection

You can set the alarm to be generated on a camera disconnection, which causes a video loss.
Using the mouse may help make setup easier.
1. Use the up/down buttons () in <Event> window to
move to <Video Loss Detection>, and press [ENTER]
button.
A window of Video Loss Detection setup appears.
2. Use direction buttons (◄ ►) to move to a desired item,
and set the value.
Video Loss State : Sets whether to activate video loss
detection.
Alarm : Sets the alarm output method.
Alarm Duration : Sets the duration of alarm signal and alarm
sound.
3. When the video loss detection setup is done, press <OK>.
Tampering Detection
You can set to detect tampering attempts and trigger events, such as sudden change of camera's framing
direction, blocked lens and other overall change of scenes from the video.
Using the mouse may help make setup easier.
1. Use the up/down buttons () in <Event> window to
move to <Tampering Detection>, and press [ENTER]
button.
Tampering detection settings screen appears.
2. Use direction buttons (◄ ►) to move to a desired item,
and set the value.
Mode : Set whether to use Tampering Detection or not.
Sensitivity : Set the sensitivity level of tampering detection.
Alarm : Set the alarm output method.
Duration : Set the alarm signal output and its dwell time.
3. When the tampering detection setup is done, press <OK>.
M
Since the tampering detection is designed and optimized to function in accordance with the user defined sensitivity level, it
may not render a significant difference in detection with varied sensitivity in general monitoring situations.
When the tampering detection mode is set <ON>, it is recommended that the pre event recording time of the corresponding
channel should be set to 5 seconds or longer.
Video Loss Detection
CH
Video Loss State
Alarm
1
OFF
None
2
OFF
None
3
OFF
None
4
OFF
None
5
OFF
None
6
OFF
None
7
OFF
None
8
OFF
None
Previous/Next Page
OK
Cancel
Tampering Detection
CH
Mode
Sensitivity
Alarm
1
OFF
Medium
None
2
OFF
Medium
None
3
OFF
Medium
None
4
OFF
Medium
None
5
OFF
Medium
None
6
OFF
Medium
None
7
OFF
Medium
None
8
OFF
Medium
None
Previous/Next Page
OK
Cancel
English _55
Alarm Duration
10 sec
10 sec
10 sec
10 sec
10 sec
10 sec
10 sec
10 sec
Help
Duration
10 sec
10 sec
10 sec
10 sec
10 sec
10 sec
10 sec
10 sec

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdh-p5081Sdc-9440buSdc-7340bcSdr-5200

Table of Contents