Adjusting The Backrest; Adjusting Head Restraint Height - Britax Parkway SG User Manual

Using the Child Seat

Adjusting the Backrest

WARNING! Reclining the vehicle seat back may
adversely affect the position of the vehicle seat belt across
the child and may result in death or serious injury in a crash.
Refer to your vehicle owner's manual for information on
adjusting the vehicle seat back with child seats.
The backrest should be
adjusted to the upright angle of
the vehicle seat back (Fig. A).
1 Place the booster seat on the
vehicle seat.
2 Push the backrest until it
rests against the vehicle seat
back (Fig. B). If the vehicle seat back
is adjustable, move it to the upright
position.
IMPORTANT: Do not recline
the backrest past the allowable
adjustable range (Fig. C).
16
a
b
c

Adjusting Head Restraint Height

The head restraint can be adjusted and locked into
different positions. Choose the position best suited to your
child's safety. See page 6.
Tip: Check the fit with child seated in booster seat. Ensure
that the shoulder belt guides are even with, or just above,
the child's shoulder. See page 6.
1 Squeeze and hold the height adjustment handle to
adjust the head restraint (Fig. D).
2 Slide head restraint up or down to the
desired level (Fig. E).
3 Release the adjustment handle. Repeat
this process until the shoulder belt rests
comfortably across the center of the
child's chest when positioned through
the shoulder belt guide (Fig. F).
4 Ensure the head restraint has locked
into place.
Using the Child Seat
d
e
f
17