Using the Child Seat
Adjusting the Backrest
WARNING!
Reclining the vehicle seat back
may adversely affect the position of the vehicle seat
belt across the child and may result in death or serious
injury in a crash. Refer to your vehicle owner's manual
for information on adjusting the vehicle seat back with
child seats.
The backrest should be
adjusted to the upright
angle of the vehicle seat
back (Fig. A).
1
Place the booster seat on
the vehicle seat.
2
Push the backrest until it
rests against the vehicle seat back
(Fig. B). If the vehicle seat back is
adjustable, move it to the upright
position.
IMPORTANT: Do not
recline the backrest past the
allowable adjustable range
(Fig. C).
16
a
b
c
Adjusting Head Restraint Height
The head restraint can be adjusted and locked into
different positions. Choose the position best suited to your
child's safety. See page 6.
Tip: Check the fit with child seated in booster seat. Ensure
that the shoulder belt guides are even with, or just above,
the child's shoulder. See page 6.
1
Squeeze and hold the height adjustment handle to
adjust the head restraint (Fig. D).
2
Slide head restraint up or down to
the desired level (Fig. E).
3
Release the adjustment handle.
Repeat this process until the
shoulder belt rests comfortably
across the center of the child's
chest when positioned through the
shoulder belt guide (Fig. F).
4
Ensure the head restraint has
locked into place.
Using the Child Seat
d
e
f
17