O P E R A T I N G I N S T R U C T I O N S
The CS and CTS devices are
equipped with an expandable
accessories port which inter-
faces with the Edge Expandable
Accessory System ( EAS), as
well as a video-in jack.
(Figure 28)
ACCESSORY PORT
VIDEO-IN JACK
(CTS ONLY)
Figure 28
The EAS is an accessory net-
work cable that transmits data
between the CS or CTS and
Edge Accessories.
With the EAS you can add mul-
tiple accessories to the CS or
CTS using a daisy-chain-style
connection system.
Refer to your EAS Supplement
Manual for instructions on how
to properly install your EAS
Devices.
44
U S I N G
U S I N G
A C C E S S O R I E S
A C C E S S O R I E S
EAS
U S E R
JA B ( EA S )
The JAB (Juice to Attitude
Bridge) allows you to connect
your Edge Juice Module to your
CS or CTS device. This allows
your CS or CTS to communi-
cate with and control your Juice
Module.
EGT PROB E ( EA S )
The EGT (Engine Exhaust
Temperature) sensor gives you
direct engine temperature read-
ings via a temperature probe.
The EGT is plugged into the
accessory port shown in Figure
28.
EG T P ROB E [ S TA N D ARD]
If you are not interested in an
expandable system, use the
Standard Edge EGT probe.
The standard EGT probe is not
expandable with future acces-
sories.
EDGE BACKUP CAMERA
Finish your CTS off with the
Edge Products Backup Cam-
era. (Figure 30) The Backup
Camera provides a high-quality
color image with "Night Vision"
infrared LEDs allowing users
to see objects in total darkness.
The adjustable lens assembly al-
G U I D E