Edge Products CS User Manual page 38

O P E R A T I N G I N S T R U C T I O N S
a custom program." Choosing
YES will load the Custom Op-
tions menu. (Figure 25)
This will allow you to change
certain parameters of the level
you choose. Selecting NO will
program a standard power level.
USE CURRENT SETTINGS
This option will use the previ-
ously selected options.
RESET ALL VALUES
This option will restore all of
the settings back to factory
defaults.
TIRE SIZE
This option will allow you to
select a new tire size if you've
changed the factory tires.
GEAR RATIO
This option will allow you to
select a new gear ratio if you've
changed the factory gears.
SPEED LIMITER
This option will allow you to
adjust the factory speed limiter
higher or lower than the factory
set speed limiter MPH.
Your Evolution programmer
has the ability to remove/adjust
38
Figure 25
U S E R
your vehicle's factory speed
limiter. Removal/adjustment
of the factory speed limiter is
intended for use at a closed
circuit, legally sanctioned rac-
ing environment. Even if racing
in a legally sanctioned racing
environment, it is your respon-
sibility to ensure your tires
and other vehicle components
are rated to travel at increased
speeds with the speed limiter
removed/adjusted.
WARNING: If you drive
on public roads after removal
or adjustment of the speed
limiter, you must still obey all
driving laws, including ad-
hering to posted speed limits.
To drive at racing speeds on
public roads seriously endan-
gers you, your passengers, and
others nearby. Driving at high
speeds with inadequate tires or
other components can lead to
serious or fatal injury.
CAUTION: Removing/ad-
justing the speed limiter for
purposes inconsistent with the
product's intended function
violates the product's intended
use and will invalidate the
product's warranty. Edge
Products is not responsible for,
or liable for the consequences
G U I D E