Infant Car Seat Mode; Using The Infant Car Seat Receivers; Using A Britax Infant Car Seat - Britax B-AGILE 4 User Manual

Infant Car Seat Mode

waRning!
All infant car seats MUST be installed rear facing.
iMPORTanT: For non-BRITAX infant car seats, an infant car seat
adapter frame must be used. This adapter frame is sold separately at
select retailers and on www.britaxusa.com.

Using the infant Car Seat Receivers

attaching the infant Car Seat Receivers
NOTE: Receivers are marked left and right. Attach each from the
position of the occupant.
1. Lock the parking brake.
2. Align the receivers with the mounts on
the inside frame of the stroller.
3. Push down until a click is heard. Pull
up on the receivers to ensure they are
secure.
14
Removing the infant Car Seat Receivers
1. Press the button on the receiver and lift
upward.

Using a BRiTaX infant Car Seat

attaching a BRiTaX infant Car Seat
1. Set the parking brake.
2. Line up the adapter on the infant car
seat with the receivers on the stroller.
3. Press down until locked into place.
4. Lift up on the infant car seat to ensure
that it is secure.
Removing a BRiTaX infant Car Seat
Refer to your infant car seat user guide for information on the removal
instructions for your specific model.
15