Recovery Media - Toshiba Satellite L350 series User Manual

Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4,
Problem
Cannot access
Wireless LAN

Recovery Media

Problem
The following
message appears
when executing
Recovery Media
Creator.
[The Recovery
Media Creator can
not be launched
because there is
no recovery
partition.]
Downloaded from LpManual.com Manuals
User's Manual
Operating Basics.
Procedure
Make sure the computer's wireless
communication switch is set to on.
If problems persist, consult your LAN
administrator.
Procedure
You will see this message if you have previously
chosen to remove the partition and are trying to
create Recovery Media. When there is no
recovery partition, the Recovery Media Creator
cannot make Recovery Media.
However, if you have already created a
"Recovery Media", you can use it to restore the
recovery partition.
Simply follow the instructions in
preinstalled software from your created recovery
media
to select Restore Original Factory Image from
the drop-down menu. If you have not created
Recovery Media, please contact TOSHIBA
support for assistance.
section in this manual. You will be directed
Troubleshooting
Restoring the
9-13