Power On Display - Toshiba Satellite L350 series User Manual

3. Click the OK button. If the character string you enter matches the
If they do not match, the following message appears. You must repeat
step 1.
If you enter the password incorrectly three times in a row, the computer
need to shut off.
You will not be able to access the password option in the HW Setup. In
this case you must turn the power off and back on to retry the procedure.
4. Follow the same procedures described in the earlier section, How to
Display
This tab allows you to customize your computer's display settings for either
the internal LCD screen or for an external monitor.

Power On Display

Allows you to set the display to be used when the computer is booted.
Auto-Selected
LCD + Analog RGB
System LCD only
CPU
Dynamic CPU Frequency Mode
This option allows you to choose from the following settings:
(Depends on which model you purchased)
Dynamically
Switchable
Downloaded from LpManual.com Manuals
User's Manual
registered password, the password option is reset and the display
changes to:
Not registered
Incorrect Password.
set the password, to set a new user password.
Selects an external monitor if one is connected,
otherwise, it selects the internal LCD display
(Default).
Selects both the internal LCD and an external
monitor for simultaneous display.
(Depends on which model you purchased)
Selects the internal LCD, even if an external
monitor is connected.
(Depends on which model you purchased)
CPU power consumption and clock speed
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary.
(Default)
HW Setup and Passwords
7-3