Toshiba Satellite L350 series User Manual page 132

Problem
After making a call
you can't hear a ring
Communication is cut
off unexpectedly
A CONNECT display is
quickly replaced by
NO CARRIER
Character display
becomes garbled
during a
communication
You cannot receive an
incoming call
Sleep/Hibernation
Problem
The system will not
enter
sleep/hibernation
LAN
Problem
Cannot access LAN
Wake-up on LAN
Downloaded from LpManual.com Manuals
User's Manual
Procedure
Make sure the tone or pulse selection in your
communications application is set correctly.
You can also use the ATD command.
The computer will automatically cut off
communication when connection with the carrier
is not successful for a set time interval. Try
lengthening this time interval.
Check the error control setting in your
communications application.
You can also use the AT\N command.
In data transmission, make sure the parity bit and
stop bit settings correspond with those of the
remote computer.
Check the flow control and communication
protocol.
Check the rings before auto answer setting in an
incoming call your communications application.
You can also use the ATS0 command.
If problems persist, contact your dealer.
Procedure
Is Windows Media Player open? The system
might not enter sleep/hibernation, if Windows
Media Player is either playing a selection or
finished playing a selection. Close Windows
Media Player before you select
sleep/hibernation.
If problems persist, contact your dealer.
Procedure
Check for a firm cable connection between the
LAN jack and the LAN HUB.
Make sure the AC adapter is connected. The
does not work Wake-up on LAN function
consumes power even when the system is off.
If problems persist, consult your LAN
administrator.
Troubleshooting
9-12