Table of Contents
Advertisement
3.1 OPTIONAL ACCESSORIES (NOT
INCLUDED) TO USE GLOMEX
ANTENNAS
To be able to use your new GLOMEX satellite
antenna for river boats, you will have to procure or
buy also:
- a TV set;
- a satellite receiver for channel selection.
The table below lists all the GLOMEX optional
components, with relevant code.
Optional accessory
Satellite
receiver
TIVÙSAT
230 VAC - 12 VDC
SD card with new satellite
SD card with software update
4.
NECESSARY TOOLS FOR
ASSEMBLY (NOT PROVIDED)
Procure all tools and materials listed below. They
will be necessary to complete installation.
- Electric drill (1).
- Drill tips: 8 mm for fastening the radome, 2.5
mm for built-in installation of the control unit and
12 mm for the passage of the cable (2).
- Phillips screwdriver (3).
- 11 mm wrench (for the installation of the coaxial
cable connectors) (4).
- 2 mm Allen wrench (for M4 dowels) (5).
- Reciprocating saw (to create the compartment
for wall built-in installation of the control unit; use
the template provided on page 51) (6).
- Sealant like SIKAFLEX®252 (7).
Fig. 2
www.glomex.it
I-CAN
1110
SV
Plan the whole installation before proceeding!
Please consider the lay-out of the various
components, the distance between them, the
length of the various cables and the accessibility to
the equipment once it is installed.
43
DANUBE 2 R500
GLOMEX code
V9193
4.120.0077
4.120.0078
S
WARNING
Advertisement
Table of Contents
