3.1 OPTIONAL ACCESSORIES (NOT
INCLUDED) TO USE GLOMEX
ANTENNAS
To be able to use your new GLOMEX satellite
antenna for mobile vehicles, you will have to pro-
cure or buy also:
- a TV set;
- a satellite receiver for channel selection.
The table below lists all the GLOMEX optional
components, with relevant code.
Optional accessory
Terrestrial digital - satellite (DVBT + DVB) combi
decoder
SD card with new satellite
SD card with software update
Frame for built-in installation
Coaxial cable, 10 m long, for antenna - control unit
connection, with integrated protection
Roof fairlead (enables cable and connector pas-
sage)
4.
NECESSARY TOOLS FOR
ASSEMBLY (NOT PROVIDED)
- Electric drill.
- Drill tips: 3.5 mm (for fastening the control unit to
a non-wooden wall), 6 mm (for fastening the
control unit to wooden walls, by using an expan-
sion plug), 8 mm (for fastening the radome),
12 mm (for the passage hole of the coaxial
cable).
- Phillips screwdriver (with adequate dimensions
for control unit opening).
- 11 mm wrench (for the installation of the coaxial
cable connectors).
- Reciprocating saw (to drill a hole in case of wall
built-in installation of the control unit; use the
template provided on page 15).
- Sealant type SIKAFLEX®212-FC or similar.
www.glomexmobile.com
GLOMEX code
V9190
4.120.0077
4.120.0078
4.010.0008
4.070.0096
RA140
S
WARNING
Plan the whole installation before proceeding!
Please consider the lay-out of the various compo-
nents, the distance between them, the length of the
various cables and the accessibility to the equip-
ment once it is installed.
9
DISCOVERY S460S
EXPLORER S460M