Table of Contents
Advertisement
7.1 HOW TO USE THE SLEEP MODE
The first time you need to select the desired
satellite (ASTRA1 or HOTBIRD).
SATELLITE DVB ANTENNA
CONTROL UNIT
Fig. 22
The antenna will search for the satellite and, after
recognizing it correctly (GREEN light), you can
select the SLEEP position.
SATELLITE DVB ANTENNA
CONTROL UNIT
Fig. 23
In sleep mode, the antenna will stop and it will not
enter the tracking mode. It means that, if you move
with the boat, the antenna will lose the signal.
Once the antenna is switched off, if the boat did not
move, you can switch the antenna on again directly
in sleep mode.
When you move to a different location you have to
switch off the antenna, select the desired satellite
on the control unit, switch on the antenna and it will
search again for it.
Then you can select the SLEEP mode again to
stop the antenna.
www.glomex.it
When you want to select the other satellite you
have to switch off the antenna, select the desired
satellite on the control unit, switch on the antenna
and it will search again for it.
Then you can select the SLEEP mode again to
stop the antenna.
57
DANUBE 2 R500
Advertisement
Table of Contents
