FEC -150 User Manual page 40

GS ^ r t m
[Name] To run the macro
[Type] ASCII
HEX
DECIMAL 29
[Range] 0 ≤ r ≤ 255 , 0 ≤ t ≤ 255 , 0 ≤ m ≤ 1
[Description] To run the macro
- r: Repetition frequency of macro execution.
- t: Delay time for executing all macros is t X 100 msec.
- m: Macro execution mode
LSB of m = 0
Macros will be executed r times continuously with a delay time of t.
LSB of m = 1
After waiting for the delay time t, paper out LED indicator blinks, and the
printer is in standby until the feed button is pressed. One the button is
depressed, the printer executes the macro once. And this operation is
repeated r times.
GS f n
[Name] To select the font of HRI (Human Readable interpretation) characters
[Type] ASCII
HEX
DECIMAL 29
[Range] n = 0, 48
[Description] To select the font of HRI characters used for barcode printing
Chinese version is not supported.
Select the font as in the table shown below.
N Font
0,48 Font A (12 * 24)
GS h n
[Name] To set the height of the barcode
[Type] ASCII
HEX
DECIMAL 29
[Range] 1 ≤ n ≤ 255
[Description] To set the height of the barcode
n is number of dots in vertical direction.
[Default value] n = 162
Rev. 1.00
GS ^ r
1D 5E r
94 r
GS f n
1D 66 n
102 n
GS h n
1D 68 n
104 n
t m
t m
t m
- 40 -
FEC-150