Summary Of Control Command - FEC -150 User Manual

10. Summary of Control Command

HT
[Name] Horizontal Tab
[Type] ASCII
HEX
Decimal
[Description] Set the horizontal tab if you want to use the print position.
LF
[Name] To print and line feed
[Type] ASCII
HEX
DECIMAL 10
[Description] To print the data in the printer buffer and feed one line.
CR
[Name] To print and carriage return
[Type] ASCII
HEX
DECIMAL 13
[Description] To print the data in the printer buffer and move the printer head to the
beginning position of the line.
DLE EOT n
[Name] To send the real-time status
[Type] ASCII
HEX
DECIMAL 16
[Range] 1 ≤ n ≤ 4
[Description] Real-time status of the printer selected by n as shown below will be sent.
n = 1: To transmit the printer status
n = 2: To transmit the off-line status
n = 3: To transmit the error status
n = 4: To transmit the paper-sensing status
Rev. 1.00
HT
09
9
LF
0A
HT
0D
DLE EOT n
10 04 n
4 n
- 25 -
FEC-150