FEC -150 User Manual page 30

ESC ? n
[Name] To cancel the user defined character set
[Type] ASCII
HEX
DECIMAL 27
[Range] 32 ≤ n ≤126
[Description] To cancel the user-defined character sets.
ESC @
[Name] To initialize the printer
[Type] ASCII
HEX
DECIMAL 27
[Description] This function purges the data in the buffer when the power is on or recovers
the printer mode.
ESC D n1...nk NUL
[Name] To set the horizontal tab position
[Type] ASCII
HEX
DECIMAL 27
[Range] 1 ≤ n ≤ 255
0 ≤ k ≤32
[Description] To set the horizontal tab position
n defines the number of columns for the horizontal table from the beginning
point of the line.
k is the total number of horizontal tabs.
ESC E n
[Name] To set highlight mode
[Type] ASCII
HEX
DECIMAL 27
[Range] 0 ≤ n ≤ 255
[Description] To select/clear highlight mode
Highlight mode is cleared when the LSB is 0.
Highlight mode is set when the LSB is 1.
ESC J n
[Name] To print and paper feed
[Type] ASCII
HEX
DECIMAL 27
[Range] 0 ≤ n ≤ 255
[Description] To print the data in the printer buffer and feed the paper.
n x vertical or horizontal motion unit inches
Rev. 1.00
ESC ? n
1B 3F n
63 n
ESC @
1B 40
64
ESC D n1...nk
1B 44 n1...nk
68 n1...nk
ESC E n
1B 45 n
69 n
ESC J n
1B 4A n
74 n
NUL
00
0
- 30 -
FEC-150