Bioness Ness L300 User Reference Manual

User's Reference Card

Putting On the L300 Functional Stimulation (FS) Cuff

While seated, slightly extend your lower leg.
1
2. Tilt the top of the L300 FS Cuff toward you, and then slide it up your leg until the locator
2
rests below the kneecap. Lower the bottom of the L300 FS Cuff onto your leg.
3. Hold the L300 FS Cuff in place with your thumb or other hand on the RF Stim Unit cradle.
3
Pull the strap handle around the cradle.
4. Figure 4 shows the L300 FS Cuff correctly placed on the right leg.
4
1

Operating the NESS L300 System

On/Off Button
Press the
1
Select either gait or training mode:
2
• To select gait mode, press the
• To select training mode, press and hold the
appears in the digital display.
If necessary, adjust the stimulation intensity level by pressing the
3
button.
Worldwide Corporate Office
Bioness Inc
25103 Rye Canyon Loop
Valencia, CA 91355
Telephone: 800-211-9136
Email: info@bioness.com
Website: www.bioness.com
NESS , NESS L300 , Intelli-Gait , Intelli-Sense Gait Sensor™, Bioness, the Bioness Logo
® ® ®
612-00096-001 Rev. B
2
Mode
Button
Plus/Minus
Intensity
Adjustment
Buttons
on/off button to turn on the Control Unit.
Manufactured by:
Bioness Neuromodulation Ltd.
A Bioness Inc Company
19 Ha'Haroshet Street
PO Box 2500
Industrial Zone
Ra'Anana 43654, Israel
3
Volume Adjustment Buttons
RF Stim Unit Intelli-Sense
Indicator
Gait Sensor™
Indicator
mode button briefly.
mode button until
European Authorized Representative
Ness Europe B.V.
Stationsweg 41
3331 LR Zwijndrecht, The Netherlands
Telephone: +31.78.625.6088
Email: international@nl.bioness.com
Website: www.bioness.com
and LiveOn are trademarks of Bioness Inc. | www.bioness.com
® ®
(Regular L300 FS Cuff shown.)
4
Control Unit
Indicator
Digital
Display
("t" for training)
plus or minus