Declaration Of Conformity - Evolution DISC CUTTER Original Instructions Manual

DECLARATION OF CONFORMITY

The manufacturer of the product covered by this Declaration is:
Evolution Power Tools, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR
The manufacturer hereby declares that the machine as detailed in this declaration fulfils all the
relevant provisions of the Machinery Directive and other appropriate directives as detailed below.
The manufacture further declares that the machine as detailed in this declaration, where
applicable, fulfils the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
2006/42/EC.
Machinery Directive.
2006/95/EC.
Low Voltage Equipment Directive.
2004/108/EC.
Electromagnetic Compatibility Directive.
93/68/EC.
The CE Marking Directive.
2002/95/EC.
The Restriction of the Use of certain Hazardous Substances in Electrical Equipment (RoHS) Directive.
2002/96/EC.
as amended by 2003/108/EC The Waste Electrical and Electronic Equipment (WEEE) Directive.
Ul 60745-1, 3rd.
Ul 60745-2-3, 2nd.
And is in conformity with the applicable requirements of the following documents
EN61029-1 / EN61029-2 / EN55014-1 / EN55014-2 / EN61000-3-2 / EN61000-3-3 / EN60825-1
Product Details
Description:
Brand Name:
Voltage:
Input:
The technical documentation required to demonstrate that the product meets the requirements
of directive has been compiled and is available for inspection by the relevant enforcement
authorities, and verifies that our technical file contains the documents listed above and that they
are the correct standards for the product as detailed above.
Name and address of technical documentation holder.
Signed:
Signed:
Date: 19.08.13
Evolution 305mm (12") Multipurpose Electric Disc Cutter
Evolution Build
110V / 230-240V
50HZ / 60HZ
Print: Steven Bulloss - Operations Director
Print: Lettie Lui - Product Manager
18
www.evolutionpowertools.com