Westinghouse WP2500 Owner's Manual page 17

10. Install the upper handle to the frame using the
handle bolts and knobs (see Figure 12).
1
2
3
Figure 12 – Installing Upper Handle
1 - Upper Handle
2 - Handle Bolt
11. Install the spray gun bracket using the M6 bolts and
nuts (see Figure 13).
1
2
Figure 13 – Installing Spray Gun Bracket
1 - Spray Gun
Bracket
3 - Knob
2 - M6 Bolts and Nuts
ASSEMBLY
12. Connect the wand to the spray gun and turn the
fi tting counterclockwise to tighten (see Figure 14).
Do not overtighten. The fi tting only needs to be
hand-tight.
1
Figure 14 – Connecting Spray Wand
1 - Spray Wand
13. Inspect the O-rings on both sides of the high-
pressure hose. Moisten the O-rings with water (see
Figure 15).
Figure 15 – High-Pressure Hose O-Rings
2
2 - Fitting
17