Fault Finding - Blue Seal Evolution GP514 Installation And Operation Manual

Fault Finding

This section provides an easy reference guide to the more common problems that may occur during the
operation of your equipment. The fault finding guide in this section is intended to help you correct, or at
least accurately diagnose problems with your equipment.
Although this section covers the most common problems reported, you may encounter a problem not
covered in this section. In such instances, please contact your local authorised service agent who will
make every effort to help you identify and resolve the problem. Please note that the service agent will
require the following information:-
• The Model Trade Name and the Serial Number of the Appliance. (both can be found on the
Technical Data Plate located on the appliance. (Refer to the 'Dimensions' section).
Fault
Pilot won't light.
Pilot goes out when gas control
knob released.
Main burner will not light.
NOTE: Components having adjustments protected (e.g. paint sealed) by the manufacturer, are only
allowed to be adjusted by an authorised service agent. They are not to be adjusted by an
unqualified service person.
For the Refrigeration Cabinet Fault Finding details, refer to the Refrigeration Cabinet Installation
and Operation Manual supplied with the appliance.
Possible Cause
No gas supply.
Blocked pilot injector.
Releasing knob before the
thermocouple has heated.
Pilot flame too small.
- Gas pressure too low.
- Partially blocked pilot injector.
Thermocouple faulty.
Incorrect supply pressure.
Faulty gas control.
18
Remedy
Ensure gas isolation valve is
turned on, and that bottles are
not empty.
Call service provider.
Hold knob in for at least 20
seconds following ignition of
pilot.
Call service provider.
Call service provider.
Call service provider.
Call service provider.