Table of Contents
Advertisement
Optional extras
Temperature sensors
(available separately)
The Chorus can be used with wireless
temperature sensors to measure room
temperatures, hot water or even outdoor
temperatures. You can measure room
temperatures to compare the efficiency of
your heating by comparing results, or to
check that your home is running as warm
or as cool as you would like.
To pair a temperature sensor to the
1. Squeeze the two clips on each side and
slide the cover off.
2. Remove the battery tab from the
temperature sensor.
3. Press the pairing button on the
temperature sensor.
Chorus PV display
Select:
» Temperatures
temperature sensor.
Follow the on-screen instructions.
Note:
automatically leave pairing mode after
30 seconds. If you have trouble pairing
the sensor, make sure that you start the
pairing process on the Chorus shortly
after pressing the pairing button on the
temperature sensor.
The temperature values are show in the
environment screen.
Chorus:
battery tab
pairing button
» Settings » Installation » Network
and choose the desired
the
temperature
sensor
will
19
Advertisement
Table of Contents
