Setting Up - Geo Chorus PV display User Manual

Setting up

Step 1 - Power up
Unscrew the battery flap and insert the
batteries supplied. Replace the cover and
plug in the power supply. The display takes
around two minutes to start. Please note:
the batteries are for backup only. If you
need to replace the batteries you must
only use NiMH rechargeable ones.
AAA rechargeable batteries
Chorus PV display
battery flap screw
Open each of the three transmitters by
pressing the button on the back and pulling
the outer cover away.
Remove the red battery tab. The flashing
red light will show that the unit is working.
flashing red light
When you have connected your display
to the internet it will set up the time
and date automatically. If you want
to do this manually it's in the menu:
» Settings » Time and date.
release button
battery tab
5