Post Authorization Operation - TEC MA-1595-1 SERIES Owner's Manual

3. MANAGER'S OWN OPERATIONS IN "MGR" MODE
3.3

Post Authorization Operation

This operation is used for finalizing the EFT sale transaction which was authorized on the off-line ECR.
Any time outside a sale, In a Signed-ON condition
CONDITION
OPERATION
Mode Lock: MGR
• Without Card Number Entry
[POST AUTH]
ECR wait condition
EFT terminal responds "APPROVAL"
• With Card Number Entry
[MANUAL CARD#]
|Sale Amount| [#]
Max. 7 digits
NOTES: 1. Pressing the [C] key at this point will restore the ECR to condition being ready for the [POST
AUTH] key entry.
2. Training cashiers are unacceptable to the EFT terminal.
3. Values 0 to 9 and A to Z should be used to enter the Authorization Code.
4. None of customer receipt is issued by the Post Authorization operation.
5. The Validation Print operation is not possible after performing the Post Authorization operation.
Card Slide |Sale Amount| [#]
NOTE 1
[POST AUTH]
(|Authorization Code|) [#]
Max. 11 characters
Max. 7 digits
Store Receipt Print
|Card No.| [#]
Max. 25 digits
(Omissible)
3- 3
3.3 Post Authorization Operation
|Authorization Code| [#]
Max. 11 characters
(Omissible)
(|Expiration Date|) [#]
Max. 4 digits; MM/YY
(Omissible)
EO1-11152