Mitsubishi Electric Lossnay VL-100U5-E Handbook page 13

3 Remove the neon lamp from the front casing.
4 Pass the neon lamp through the hole of the front casing, and then remove the front casing.
(7) Air exhaust (EA) fan
1 Remove the special nut (8) and tab washer, and then remove
the EA fan.
2 Remove the special (spl) washer (40 mm in outer diameter).
Reassembly precaution
Be aware of the size difference between each washer for EA
fan and SA fan.
Incorrect installation may cause unusual noise.
Neon lamp Hole of the front casing
─ 13 ─
EA fan
Special nut (8) Tab washer
Spl washer