Mitsubishi Electric Lossnay VL-100U5-E Handbook page 12

(5) Lossnay core
• Hold the core handle, and pull it out in the direction of the arrow while holding down the hook part.
Hook part
Core handle
<Reassembly procedure>
• When installing the Lossnay core, first fit the lower part of the core handle (indicated by "a") into "b" position
of the front casing, and then hook the ledge of the core handle to the concave portion of the front casing
(indicated by ).
Core handle
a
Reassembly precaution
Check that both edges of the Lossnay core (indicated by )
are securely fitted.
(6) Front casing
1 Unscrew the screws (six PTT screws 4 × 14, indicated by ).
2 Unscrew the lamp cover clamping screw (one PTT screw 4 × 14,
indicated by ), and remove the lamp cover.
b
Ledge
─ 12 ─
<Installed state>
Front casing
Lamp cover