Instructions; Front Panel Operation; Rear Panel Operation - SamplexPower SA-150-112 User Manual

3. Instructions

SA-150 and SA-300 series are very reliable, portable, and fully protected. These
pure sine inverters are used in a wide range of applications such as mobiles,
office equipments, home entertainment, electronic appliances, etc.
To get the most effective power inverter, it must be installed and used properly.
Please read the instructions of this manual before you install and operate this
model.
3-1. Front Panel Operations
3-1-1. ON / OFF REMOTE switch：
Leave the switch in the down position (OFF) during installation.
3-1-2. LED display indicates Power Status
Intermittently Red Blink
3-1-3. Remote Port：Place 0.75mm
3-2. Rear Panel Operations
3-2-1. Ventilation shaft：Keep the ventilation shaft a distance (at least 3 inch)
3-2.2. Input terminals：Connect the input terminal to 12V / 24V battery or
3-3-3. Use wire # 8 AWG to connects Chassis ground with Vehicle Chassis.
LED
Solid Green
Fast Red Blink
Slow Red Blink
Solid Red
remote port and the panel.
from anything surrounding it
other 12V / 24V power source. 【＋】represents
positive, and【－】represents negative. Reverse
polarity connection will blow the internal fuse and may
damage inverter permanently.
Conditions
2 and Screw type cable between the
Status
AC Power OK
OVP
UVP
OTP
OLP
6