Table of Contents
Advertisement
3-4. Installation
Before connecting your applications to the inverter, always check the power
draw of your appliances. The inverter can supply surge power for a short time
so as to start up the electrical equipment such as motors, pumps... that need
more power while starting up.
When all the above requirements are checked OK and satisfied and all
connections are made, it's time to turn on the inverter by switching the power
to ' I ' position. The sine wave filters provide sine wave output voltage when
driven from AC outlet.
To save the battery power, you are highly recommended to turn off the
inverter when it is not used.
DC input voltage status as follows:
Model
12V models
24V models
DC Input Over
Voltage
Shut-down
Restart
15.3
14.8
30.6
29.6
DC Input Under
Voltage
Shut-down
Restart
10.5
12.5
21.0
25.0
8
Advertisement
Table of Contents
