Sony Handycam DCR-DVD408 Operating Manual page 81

C")
c:
en
-
o
3
N"
:::s
lC
'<
o
c:
....
n
Q)
3
n
o
....
c.
C'D
....
Fading in Fading out
BLACK FADER
WHITE FADER
You can record a transition with the
following effects adding to the interval
between scenes.
CD
Select the desired effect in [STBY] (during
fading in) or
[REe]
(during fading out)
mode, then touch
lOKI.
®
Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFF] in step
CD.
If you press START/STOP, the setting is
canceled.
" Notes
• Do not use [SUPER NIGHTS HOT] in bright
places. This may cause a malfunction.
• Do not cover the infrared port with your fingers
or other objects (p. 115).
• Remove the conversion lens (optional).
• Adjust the focus manually ([FOCUS], p. 78)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
To return to the normal setting, set [SUPER
NIGHTS HOT] to [OFF].
" Notes
• Adjust the focus manually ([FOCUS], p. 78)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
When you set [COLOR SLOW SHTR] to
[ON], you can record an image brighter in
color even in dark places.
[~J
appears on the screen.
To cancel [COLOR SLOW SHTR], touch
[OFF].
• While
t,.
D
L:1
is t1ashing quickly during [ONE
PUSH] setting, continue to frame a white object
until
t,.
D
L:1
stops t1ashing.
• t,.
D
L:1
flashes slowly if [ONE PUSH] could not
be set.
• When [ONE PUSH] was selected, if
t,. D
L:1
keeps
t1ashing after touching 10K
I,
set [WHITE BAL.
I
to [AUTO].
• If you set [WHITE BAL. ], [SCENE
SELECTION] is automatically set to [AUTO].
"Q"
Tips
• If you change the battery pack with [AUTO]
selected, or take your camcorder outdoors after
inside use (or vice versa), select [AUTO] and
aim your camcorder at a nearby white object for
about 10 seconds for better color balance
adjustment.
• If you change the [SCENE SELECTION]
settings or move your camcorder outdoors
during white balance setting with [ONE PUSH],
you need to repeat the [ONE PUSH] operation.
The image will be recorded at a maximum
of 16 times the sensitivity of NightShot
recording if you set [SUPER
NIGHTSHOT] to [ON] while the
NIGHTSHOT switch (p. 38) is also set to
ON.
S@ appears on the screen.
Continued"
81