Before Using For The First Time - Miele W 1945 Operating Instructions Manual

Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of leaks
during use. See "Installation and
connection".
This washing machine has
undergone a complete functional test
at the factory and there will be some
residual water in the drum from this
process.
For safety reasons, spinning is not
possible until the machine has been
prepared for using for the first time. To
activate the spinning function you must
run a wash programme without laundry
and without detergent.
Using detergent could result in an
excessive build-up of foam.
This also activates the ball valve. The
ball valve prevents detergent escaping
from the suds container into the sump
during a wash programme, thus making
maximum use of the detergent.
^ Press the _ button in.
If the washing machine is being
switched on for the first time, the
welcome screen will appear.
The welcome screen will appear in
the display every time the washing
machine is switched on until a
programme lasting longer than
1 hour has been completed.

Before using for the first time

Setting the language
You will be asked to select the
language you require for the display. It
is possible to change the language at
any time via the programmable
functions.
deutsch
!
^ If the language shown is not the one
you want, press the Spin speed (ü)
or Delay start (<) button until the
language you do want appears.
^ Press the Temperature (OK) button to
confirm your selection.
Reminder to remove transport bars
To avoid the risk of damage, the
transport bars must be removed
before the machine is used for the
first time. See "Installation and
connection" for instructions on how
to do this.
^ After removing the transport bars (if
this has not already been done by
your fitter) press the Temperature
(OK) button.
Run your first programme
The Cottons 60°C will be selected
automatically. Run this programme
without any laundry and without
detergent.
^ Open the stopcock.
^ Press the Start/Stop button.
^ At the end of the programme switch
the machine off.
^ The washing machine is now ready
for use.
13