The Following Fault Messages Appear In The Display And The Programme Stops - Miele W 1945 Operating Instructions Manual

The following fault messages appear in the display and the
programme stops
Fault message
Drain
fault
;
Water inlet
fault
;
Waterproof
fault
;
Technical
fault
;
A To switch off the fault message: Switch the machine off with the _ button.
Possible cause
– The water outlet is
blocked or restricted.
– The drain hose has
been fixed too high.
The water inlet is blocked
or restricted.
The water protection
system has reacted.
There is a fault.
Problem solving guide
Remedy A
– Clean the drain filter and
the drain pump.
– The maximum delivery head
is 1 m.
Check whether
– the stopcock is opened
properly.
– the inlet hose is kinked.
– the water pressure is too
low.
– Close the stopcock.
– Call the Service
Department.
Start the programme again.
If the fault message appears
again, contact the Service
Department.
41