Re-Fitting The Transit Bars - Miele W 1945 Operating Instructions Manual

,
To avoid the risk of injury the
holes for the transit bars must be
covered after the transit bars have
been removed.
^ Plug the holes with the plastic caps
as illustrated.
Installation and connection
^ Secure the transit bars to the back of
the washing machine. Make sure that
the top catch is located above the
holder.
,
The machine must not be moved
without the transit bars in place.
Store them as shown or keep them
in a safe place for future use. They
must be re-fitted if the machine is to
be moved again (e.g. when moving
house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the
procedure.
53