Spinning; Final Spin Speed - Miele W 1945 Operating Instructions Manual

Spinning

Final spin speed

Programme
Cottons
Minimum iron
Delicates
Woollens /
Express 20
Intensive plus
Separate rinse/Starch
Shirts
Dark garments / Denim
Automatic plus
Spin
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.
22
To omit the final spin (Rinse hold)
^ Select the Rinse hold (e) setting
rpm
using the Spin speed button. The
1400
laundry will not be spun and will
1200
remain suspended in the final rinse
water. This reduces creasing if the
600
laundry is not going to be removed
1200
from the drum immediately after the
1400
end of the programme.
1400
– To start the final spin:
1200
600
The washing machine will display the
1200
maximum spin speed possible. You
can select a spin speed lower than
1200
this. Start the final spin by pressing
1400
the Start/Stop button.
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin (No .)
^ Select the No . setting using the
Spin speed button.
The laundry is not spun after the final
rinse. The water will drain away and the
machine will go straight into the
anti-crease stage.
With some programmes an additional
rinse is introduced if this setting is
selected.