Throttle Control Lever; Horn Button - Pride Sundancer Owner's Manual

Your Sundancer is a motorized electric Scooter designed to enhance your personal mobility. It is an indoor/
outdoor Scooter that was designed to travel primarily on smooth surfaces such as footpaths, roads, parking lots,
floors, and driveways. For easy transportation or storage, you can disassemble your Sundancer into seven
components. See figure 5. To decrease the rear section weight or to charge your batteries while your Scooter is
disassembled, you can also remove the utility tray and its subcomponents from the rear section. For further information
on disassembly, see VIII. “Disassembly and Assembly.” For further information on charging your batteries while
your Scooter is disassembled, see V. “Batteries and Charging.”
FRONT SECTION
Figure 5. Sundancer Components
CONTROL CONSOLE ASSEMBLY
The control console assembly located on the front section houses all of the controls you need to operate your
Scooter. See figure 6.
WARNING! Do not expose the control console assembly to moisture. In the event it does become
exposed to moisture, do not attempt to operate your Scooter until it has thoroughly dried.
Light Switch (Optional, not shown)
This switch enables you to control the headlight and running (rear red) light.
n Press this switch once to turn on the lights.
n Press it again to turn off the lights.

Throttle Control Lever

This lever allows you to control the forward and reverse speeds up to the maximum you preset on the speed
adjustment dial. For instructions on how to operate the throttle control lever, see VI. “Operation.”

Horn Button

This button activates a warning horn.
n Ensure the key is fully inserted into the key switch and push the horn button to sound the horn.
Sundancer
I V . D E S C R I P T I O N
SEAT
FRONT BASKET
REAR SECTION
BATTERIES
REAR SHROUD
11