Connectors; Floppy Disk Drive Connector: Fdd1; Fan Power Connectors: Cpufan1/Sfan1, Sfan2/Nbfan1 - MSI 865PE/G Neo2-P MS-6728 Manual

The mainboard provides connectors to connect to FDD, IDE HDD, case,
LAN, USB Ports, IR module and CPU/System/Power Supply FAN.

Floppy Disk Drive Connector: FDD1

The mainboard provides a standard floppy disk drive connector that
supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.

Fan Power Connectors: CPUFAN1/SFAN1, SFAN2/NBFAN1

The CPUFAN1 (processor fan), SFAN1/SFAN2 (system fan) and NBFAN1
(NorthBridge Chipset fan) support system cooling fan with +12V. It supports
three-pin head connector. When connecting the wire to the connectors, al-
ways take note that the red wire is the positive and should be connected to the
+12V, the black wire is Ground and should be connected to GND. If the
mainboard has a System Hardware Monitor chipset on-board, you must use a
specially designed fan with speed sensor to take advantage of the CPU fan
control.
GND
+12V
SENSOR
CPUFAN1
MSI Reminds You...
1. Always consult the vendors for proper CPU cooling fan.
2. CPUFAN1 supports the fan control. You can install Core
Center utility that will automatically control the CPU fan speed
according to the actual CPU temperature.

Connectors

FDD1
GND
+12V
NC
SFAN1, SFAN2
Hardware Setup
GND
+12V
Sensor
NBFAN1
2-17