Basics
• For the setting procedures of the menu.
[USB Mode]
Select communication method for when connecting camera to a computer or printer with
USB connection cable (supplied). Update the GPS assist data.
■
Settings
[Select on connection]
[PictBridge(PTP)]
[PC]
[GPS assist data]
[TV Connection]
Change the settings to be used when the camera is connected to a TV or other device.
●
[Video Out]
■
Settings
[NTSC]
Video output is set to NTSC system.
[PAL]
Video output is set to PAL system.
●
[TV Aspect]
This setting performs when an AV cable (optional) is connected.
■
Settings: [
●
[3D Playback]
Set how 3D still picture is output.
■
Settings: [3D] / [2D]
●
If you want to play back a picture in 2D (conventional picture) on a 3D television,
set to [2D].
●
This item of the menu functions when an HDMI micro cable is connected.
●
For the procedure for playing back a 3D still picture.
Select communication method each time you connect to a computer
or PictBridge-compatible printer.
Select when connecting to a PictBridge-compatible printer.
Select when connecting to a computer.
Select when using this unit to update GPS assist data.
] / [
]
(→60)
(→281)
- 72 -
Using the [Setup] menu
(→266)
VQT5E85