Panasonic Lumix DMC-TZ60 Basic Operating Instructions Manual page 344

Others
Q&A
Troubleshooting
Try checking these items
If the problem persists,
Performing [Reset] in the [Setup] menu may resolve the issue (→71). (Note that except
for some items such as [Clock Set], all settings are returned to their values at the time
of purchase.)
Also, see the Panasonic support site for the latest support information.
http://panasonic.jp/support/global/cs/dsc/
(This site is available in English only.)
Battery, power
The charging lamp is flashing.
●
Charging is being performed in a place with extremely high or low temperature.
→ Reconnect the USB connection cable (supplied) and retry charging in a place where ambient
temperature is 10 °C to 30 °C (50 °F to 86 °F) (temperature conditions also apply to the battery
itself).
●
Charging is not possible if the power supply capacity of the computer is low.
The charging lamp turns on again after it had turned off.
●
The battery is being recharged.
→ If the battery charge level is low when the camera is turned off and [GPS Setting] is set to [ON],
battery recharging may be started automatically.
Camera does not work even if the camera is turned on.
●
Battery is not inserted correctly (→18), or needs recharging.
Camera switches off as soon as the camera is turned on.
●
Battery needs recharging.
This unit is turned off automatically.
●
If you connect to a TV compatible with VIERA Link (HDMI) with an HDMI micro cable and turn off
the TV with the remote control for the TV, this unit also turns off.
→ If you are not using VIERA Link (HDMI), set [VIERA Link] to [OFF].
(→304 - 315) first.
- 304 -
(→73)
VQT5E85